LOADING IN MASKED TIME
The ACTIVE safety system allows to load the component to be machined in masked time, so without neither stop of the production cycle nor risk for the operator cause the working area is protected by light curtains that meet the most restrictive standards.
Tthe regular configuration of the F1 TRS is with 3 HF liquid-cooled spindles of max 40.000 RpM of speed and 0,75 Hp of power each that are fitted onto a pneumatic driven support and foreseen of air-liquid spray cooling kit.
The tilting vise designed by Faro has a 360° movement and is thus a very useful accessory to easily carry out demanding machining processes in both flat mode and on inclined plane in the same production cycle.
The proprietary CAD-CAM software has lots of features especially developed for generating all that machining processes typical of the eyewear industry, including all the related modifications without touching the holding fixtures.
XYZ = 310X450X200mm
Working area in Y 155mm (with all the tools)
Resolution XY: 2 µm
Resolution Z: 1 µm
Feed Rate XY: 45 mt/m
Feed Rate Z: 18 mt/m
Overall Size WLH: 90 x 130 x 185 cm
Weight : 400 kg
Power Supply: 220V
File Format: ISO G-code
Rotating CNC Pallet:
Maximum working torque: Nm 90
Maximum rotation speed: 66 RpM
Minimum angolar movement: 0,001 degrees
Maximum positioning error: Arc Sec ± 30.
Position repeatability: Arc Sec ± 60.
Maximum weight borne: Kg 20.
Internal CPU 32 bit floating point.
4 Mb RAM.
Multi-functional remote controller.
Automatic tool presetting.
4 separate lines air/liquid CNC controlled.